Call (510) 841-0883 [email protected]

Contact Form

4 + 10 =

Term & definition explained by Oakland CA plumber: Sump basin

A sump basin is what the sump pump sits in. It typically measures at least 24 inches deep with a diameter of about 18 inches. Excess rainwater due to flooding catches in the basin where it is pumped out of the basement via mechanical or electrical pressure.

Question and answer courtesy of Oakland plumber: What are some common repair problems with sump pumps?

There are many reasons why your sump pump may not work, such as power failure, a stuck sump float switch, overworked pump for the existing horsepower, frozen discharge pipe and age of the unit. Sump pumps have a typical life span of about five to seven years, at which point they can break down.

Oakland Plumbing: Article About Sump Pump Types and Installation

Berkeley Plumbing and Heating: Experienced Oakland CA Plumber

A sump pump is a specialized pumping mechanism that removes excess water from a basin and is usually found in basements. You may need a sump pump because you live in a region that frequently experiences flooding as a result of storms and snow melt-off. A basic sump pump works to get rid of accumulating water that enters the basement through a perimeter drain. The water is then pumped safely away from the home, either into a dry well or city storm drain.

When you enlist the help of a plumber for your sump pump installation, you get focused expertise that allows you to have a fully functioning pump in your basement to tackle almost any job required. Not all sump pumps are created equal, however; you should find the one that’s right for your needs by considering the frequency and severity of flooding as well as the size of your basement. Consulting with a skilled Oakland plumbing company can help connect you with the best sump pump for you.

There are a few different types of sump pumps. The one you choose will depend on the type of basin or waterproofing system you have, your budget and your unique needs as a homeowner. Submersible and pedestal pumps are the most common for residential use.

A plumber at Berkeley Plumbing and Heating of Oakland CA can assist with any questions regarding water heaters or radiant heating.

The submersible type works exactly how it sounds: the pump is submerged in the water within the sump basin. These are ideal to use as they are quieter and more efficient than their pedestal counterparts. Pedestal pumps protrude from the basin lid with a motor on top. Effluent pumps are not quite as common; these get rid of waste water from laundry machines, showers and sinks.

Your expert plumber will be able to assess your situation and recommend the right size sump pump based on how frequently you experience flooding and how severe the flooding is. You’ll have to choose the right horsepower for your needs as well as the sump basin and discharge diameter. The actual sump pump installation may involve breaking through concrete, setting the pump in the basin, connecting the valves and attaching the discharge pipe, which extends to the exterior of the home for drainage well away from the foundation. For this reason, professional installation is recommended as the safest course.

Installing a sump pump is ideal if you frequently experience water accumulation in your basement. Without addressing water damage issues, this can lead to harmful mold growth. Mold can cause asthma flare-ups, allergies and even cancer in the case of toxic black mold. Water in your basement can also lead to structural damage to your home, most notably the foundation. Keeping on top of flooding with sump pumps is key to maintaining the structural integrity of your home as well as the health of all occupants.

Contact Berkeley Plumbing and Heating today

For commercial and residential services and products for your plumbing, heating, or cooling needs, contact us via the below form or call (510) 841-0883.